KERN & SOHN AET 200-4NM User Manual
Page 30
30
AET_/PET_/ILT_NM-BA-e-1410
•
AUTOTARE
Means of operation:
Each first stable measurement result is tarred. The NET pictogram
flashes on the display. The operator can determine net mass of weighed
load. On taking off the load from balance’s weighing pan, and as the
indication returns to autozero zone, the software automatically
deactivates Tare value.
−
Automatic footer printout
Accessible options:
MODE - No – manual footer printout,
Sum of measurements – the condition for printing a footer is
exceeding mass value set in parameter
Number of measurements – the condition for printing a footer
is carrying out a pre-defined number of measurements (a
batch) set in parameter
THRESHOLD – setting the value of threshold determining footer
printout.
For option
in measuring unit [g], and for option measurements> the value is not measurable, and determined by number of carried out measurements. − Printout mode / printout release • Function key PRINT / printout release, (manual operation) Never – printout deactivated First stable – the first stable measurement is printed Each stable – all stable measurements are set for printing Each – printout of all measurements (stable and unstable), in case of a verified balance only stale measurement results are printable (as in setting • AUTOMATIC MODE Never – printout deactivated First stable – the first stable measurement result obtained after placing a load on balance’s weighing pan is recorded, record of the following measurement result takes place only on unloading the weighing pan, returning of the mass indication below set threshold’s value, and placing another load on balance’s weighing pan Last stable – accepted is the last stable measurement recorded before taking the load off the weighing pan. The record takes place on taking the load off the balance’s weighing pan, and returning of the mass indication below set threshold’s value. • THRESHOLD mass value obligatory for operation of automatic printout. Set in grams.