KERN & SOHN AET 200-4NM - Manual (Page 125)

AET_/PET_/ILT_NM-BA-e-1410 125
• During control process, balance’s display shows on an ongoing basis basic
parameters on the carried out control, i.e.:
− Set standard quantity
− Product
− Average
− Standard deviation
− Number of T1- errors
− Number of T1_ errors
• On completing the measuring process for a specific batch, the balance
generates a report that is printed on a printer connected to the balance,
and simultaneously saved on the corresponding database.
CAUTION:
Each control process can be aborted at an optional moment by pressing
key on balance’s display. On pressing the process is stopped and the
control is cancelled (no report is generated for an aborted control).
26.4. Printouts
Option Printouts enables setting the contents of printouts in a standard printout
and also determining non-standard printouts.

Standard printout
comprises four internal blocks, each featuring different variables. Each
variable can be attributed with parameter YES – i.e. present on a
printout, or NO – i.e. not printed.
Settings for header printout, weighing printout, and footer printout are
specified in point. 14.4; below description refers to setting a printout
template from a mass control report.
A user can design content of a report.
CAUTION:
The content of data in each measurements present in the report is set
in option . Each time a report is printed,
the space dedicated for printouts is filled in with data which is marked
with an attribute in the < Weighing printout template >.