KERN & SOHN AET 200-4NM - Manual (Page 148)

148 AET_/PET_/ILT_NM-BA-e-1410
29.3. Barcode scanners
The balance enables cooperating with barcode scanners, which are used to
quick searching for a product in the database of products. Connection to a
barcode scanner is configured in submenu < Barcode Scanner>.
Available options:
•
Setting communication port with a barcode scanner,
•
Offset setting,
•
Setting barcode length.
Caution:
Submenu < Communication> requires setting baud rate to compatible with the
one used barcode scanner (default 9600b/s). Detailed description of communicating
the balance with a barcode scanner is provided in APPENDIX F of this user manual.
The balance enables communicating with a barcode scanner using the
following ports:
•
RS 232 (COM1),
•
RS 232 (COM2),
Offset
Setting the first data carrying character of a barcode, which is the first
recognized character while searching for a product.
Code length
Setting number of characters recognized during searching for a product.
29.4. Transponder card reader
Selecting (logging) a user on each switching on the balance can be carried out
by means of:
•
Inserting user’s password using on-screen keyboard,
•
With a transponder card scanner, by approximating a registered card to the
scanner.
Caution:
For correct balance’s cooperation with a transponder card reader set appropriate baud
rate value in submenu <
Communication> (default 9600b/s).
Transponder card scanner port.
The balance enables communicating with a transponder card scanner using
the following ports:
•
RS 232 (COM1),
•
RS 232 (COM2).