KERN & SOHN AET 200-4NM - Manual (Page 14)

14 AET_/PET_/ILT_NM-BA-e-1410
3. STARTUP
•
On plugging the balance to mains, instrument’s diode ON/LOAD
located on indicator’s housing is lit up.
•
Press powering key located on the upper left section of terminal’s
overlay. Within a few seconds, the OS Windows CE and software start
loading, which is signaled by flickering red diode ON/LOAD.
•
On completing the startup procedure, the instrument’s displays main
window of the balance software.
•
The balance starts up with no user logged in. In order to start operation,
a user has to log in. (logging procedure is described further in this user
manual).
CAUTION: Remember to start the balance with no load on the weighing pan.