KERN & SOHN AET 200-4NM - Manual (Page 134)

134 AET_/PET_/ILT_NM-BA-e-1410
27.8. Pipettes
Database of Pipettes contains records and specification on pipettes to be
calibrated.
Procedure
•
Enter submenu < Databases>, and press < Pipettes> field
•
Press < Add > soft key should a new pipette be added,
•
If a pipette already exists in the database of pipettes, press field with its
name to enter its specification which is optionally configurable.
List of parameters defined on a pipette:
1. Name
2. Code
3. Model
4. Tip
5. Type of volume
6. Nominal volume
7. Minimal volume
8. Number of channels
9. Type
10. Tested volumes
27.9. Reports from pipette calibration processes
Reports contain data on completed pipette calibration processes. In case of
multichannel pipettes, the reports are generated for each channel separately.
Each report can be previewed, searched by date, exported or printed.
Procedure
•
Enter submenu < Databases>, and press < Reports from pipette
calibration processes >
•
Press field of a desired report record, unless it is visible on the top of the
list, wind the list forward using navigating keys
•
Report’s name consists of date and time of its creation,
e.g.: 2012.03.12 11:12:15
Caution:
It is possible to use an option for searching a report.