beautypg.com

Juniper Systems Mesa User Guide User Manual

Page 98

background image

Installing the desktop base:
1. On the back of the dock near the bottom there are two

screw holes, one on the left and one on the right. Place

screws into these holes and screw them in half-way.

2. Slide the desktop base up so the screw slots on the back

slide onto the screws and tighten them.

3. On the front of the desktop base near the top, and the

front of the dock near the bottom are two small screw

holes, one on the left and one on the right. Align the holes,

place screws into the holes, screw them in all the way, and

tighten them. The desktop base is now ready to use.

Mesa Dock Vehicle Mount

The vehicle mount (optional mobile dock accessory) allows

the mobile dock to be used in a vehicle or in another mobile

mounting application. Two RAM Mount bases with 1.5” balls,

a double socket arm, four screws, and four 8-32 nuts are

included.
Note: Additional attachments are available for the vehicle kit from

National Products Inc. at www.ram-mount.com.

98

Mesa Rugged Notepad Owner’s Manual