Juniper Systems Mesa User Guide - Manual (Page 53)

networks and their strengths appears on the Wi-Fi Wireless
screen.
3. Tap on the network you want to connect to. If you want to
add a new network, select Add New from the top of the list.
4. Configuration and authentication set up screens are shown.
Depending on the network you are connecting to, you may
need to make some selections from pull down lists and
enter information like a passkey. Some information may
not be required or will appear automatically. When you are
finished with the set up screens, press Finish.
5. Select Network Adapters from the horizontal scrolling
configuration options. For connection options, select The
Internet or Work (for office networks). Other settings can be
modified if necessary.
6. If you selected The Internet, you can open Internet Explorer
and begin using the internet.
Once a Wi-Fi network is set up, the icon on the Home Page
turns blue and the name of the network is shown.
The Mesa remembers the Wi-Fi network connections created.
Ch 5 Wi-Fi Wireless Communication
53