Juniper Systems Mesa User Guide - Manual (Page 103)

Mesa Travel Charger
The Mesa Travel Charger is an optional accessory that allows
you to charge Mesa battery packs on the go. One or two battery
packs can be charged at once.
How to Use the Travel Charger
1. Battery pack(s) should be charged at room temperature (68°
F or 20° C)
2. Place the travel charger on a flat surface where it will be
undisturbed.
3. The following accessories can be used to provide power to
the travel charger:
a. Wall charger provided with the Mesa
b. Vehicle charger cable provided with the travel charger.
Plug a power adapter into the power input jack on the back
of the travel charger. Plug the other end into a wall outlet
or a vehicle cigarette lighter outlet.
4. Insert one or two battery packs into the charging slots.
Make sure you insert them fully. You will feel a slight
catch.
Charge Time
„
Two depleted batteries (in the charger at same time):
approximately 3.5 hours to fully charge.
„
One depleted battery: approximately 2.6 hours to fully
charge.
Appendix C Charging and Docking Accessories
103