Sample datafill for table iphost, Table ipthron – Cabletron Systems DMS-100 User Manual
Page 89
Chapter 3: EIU datafill 89
DMS-100 Family EIU User Guide TELECOM12
The datafill appears in the following table.
Sample datafill for table IPHOST
Figure 18 shows sample datafill for table IPHOST for an EIU.
Figure 18
Datafill example for table IPHOST
Table IPTHRON
Table IPTHRON contains the IP throttling numbers that control congestion.
The IP datagram flow from SuperNode hosts requires throttling to control
congestion in the shared communication resources between the local message
switch (LMS) and the message switch (MS). The IP throttling values in this
table indicate the level of throttling in kbyte/s imposed by each IP SuperNode
host.
The following are general rules for datafilling table IPTHRON:
•
The LMS node name and number are key to each tuple.
Table 21
Field descriptions for conditional datafill for NODENAME = MS
Field
Subfield or
refinement
Entry
Explanation and action
MSINDEX
0 to 1
Message switch index
Enter the MS index.
SNADDR
table of 4
(0 to 255)
Internet Protocol address for node
Enter the IP address of the SuperNode
side of the node.
TCPCONN
0
Transmission control protocol
connections
Enter the TCP connections number.
FTPCLCON
0
File transfer protocol connections
Enter the FTP connections number.
FTPSVCON
0
File transfer protocol server
connections
Enter the FTP server number.
INDEX NODENAME NODEINFO
---------------------------------------------------------------------
0 CM 0 32 1 1
1 EIU 117 47 209 192 117
47 59 132 241 8 0 0