Cabletron Systems DMS-100 - Manual (Page 112)

112 Appendix A: EIU installation checklist
297-8991-910 Standard 03.01 August 1999
Use the list in table 28 as a checklist to ensure that you meet all installation
requirements for hardware, software, and datafill.
Table 28 EIU installation checklist
Item description Contact Check
Hardware
EIU hardware (NTEX22, NT9X84, NT9X85) circuit packs (one
each per EIU) Nortel
EIU attachment unit interface (AUI) cable, NTNX36PY Nortel
Media access unit (MAU) HP recommended MAU
with LEDs and SQE
switch and sufficient
shielding
Software
Former DMS-core software packages:
• NTXF05AA - EIU
• NTXF19AA - transmission control protocol/Internet
Protocol (TCP/IP) software
• NTXS11AA - file transport protocol (FTP) software
• NTX70AA - TELNET/ RMAP software
Effective CSP02, these software packages are integrated with
the telecom layer software.
Nortel
EIU software load:
• - ETC - Ethernet IP router customer load
Consult the DMS-100 PM Software Release Document, 297-
8981-599
Nortel
Datafill
EIU media access control (MAC) address
Note: Refer to Appendix I Obtaining a MAC address
Nortel
SuperNode and EIU IP addresses Nortel
customer and Network
Information Center
(NIC)
Tables LIUINV, IPTHRON, IPNETWRK, IPROUTER, IPHOST,
ENSITES, ENTYPES, and EXNDINV Nortel
customer