Cabletron Systems DMS-100 - Manual (Page 138)

138 Appendix C: Using FTP
297-8991-910 Standard 03.01 August 1999
Table 35 shows FTP operations for sessions started on a DMS-100 switch for
connection to a workstation. In this scenario, the DMS-100 switch is the local
host and the workstation is the remote host.
Send an image file to the DMS WS> binary
WS> site lrecl 1020
WS>put file_name.image FILE_NAME
where
file_name is the name of the file on the workstation and
FILE_NAME is the target file name, in uppercase, on the
DMS.
Send an unIPLed load to the DMS WS> binary
WS> site lrecl 512
WS> put file_name.sosimage FILE_NAME_UNIPL
where
file_name is the name of the file on the workstation and
FILE_NAME_UNIPL is the target file name, in uppercase,
on the DMS.
Table 35 FTP operations reference: DMS to workstation
Action Command sequence
FTP login CM> FTP
CM> FTPOPEN ‘IP_address’
where
IP_address is the address of the remote node.
Enter a valid userID and password to complete login.
FTP login (alternative steps) CM> FTP ‘IP_address’
where
IP_address is the address of the remote node.
Enter a valid userID and password to complete login.
Display the working directory of the
workstation CM> pwd
(Sheet 1 of 3)
Table 34 FTP operations reference: workstation to DMS
Action Command sequence
(Sheet 3 of 3)