Cabletron Systems DMS-100 - Manual (Page 18)

xviii
297-8991-910 Standard 03.01 August 1999
CAUTION Possibility of equipment damage
CAUTION Possibility of static electricity damage
DANGER Possibility of personal injury
DANGER Possibility of electrocution
How commands, parameters, and responses are represented
Commands, parameters, and responses in this document conform to the
following conventions.
Input prompt (>)
An input prompt (>) indicates that the information that follows is a command:
>BSY
CAUTION
Damage to the backplane connector pins
Align the card before seating it, to avoid bending the
backplane connector pins. Use light thumb pressure to align
the card with the connectors. Next, use the levers on the card
to seat the card into the connectors
CAUTION
Static electricity damage
Wear a static discharge wrist strap connected to the wrist-
strap grounding point of a frame supervisory panel (FSP) or
a modular supervisory panel (MSP). This precaution protects
the cards against damage caused by static electricity.
DANGER
Risk of personal injury
Handle the card by the edges only. Do not touch the
components on the card. These components reach very high
temperatures, and can burn causing personal injury.
DANGER
Risk of electrocution
Do not open the front panel of the inverter unless fuses F1,
F2, and F3 have been removed. The inverter contains high
voltage lines. Until the fuses are removed, the high voltage
lines are active, and you risk being electrocuted.