Cabletron Systems DMS-100 - Manual (Page 135)

Appendix C: Using FTP 135
DMS-100 Family EIU User Guide TELECOM12
Example:
ftp>commandtimeout
Default command timout value is 10 mins.
3 Set the default command timeout value to forever by typing
ftp> commandtimeout value
and pressing the Enter key.
where
value
is a time value in minutes. A value of 0 means forever.
Example:
ftp>commandmask 0
Example of a MAP response:
Default command timeout value has been changed to forever.
4 Add user information associated with this command mask by typing
ftp> adduserinfo user_id passwd default_dir privilege
and pressing the Enter key.
where
user_id
is the user_ID
passwd is the password for this userID
default_dir is the default working directory
privilege is permission to access absolute path names: y gives
permissions, n denies permissions
Example:
ftp>adduserinfo ‘johnh’ ‘johnh’ ‘/S00DTEMP’ y
Example of a MAP response:
BIND USERINFO PASSED
This userID can now FTP to this node and login using the userID and
password of johnh johnh. The session will remain established until the user
manually terminate the session.
5 You have completed this procedure.
FTP operations reference
This section provides a quick reference for FTP operations to and from the
DMS-100 switch.