Interlogix NX-590NE User Manual
Page 26
24
NX-590NE Internet Interface Installation Manual
8
248
249
250
251
252
253
254
255
Locations 92 to 125 - Reserved
Locations 126 to 133
Locations 126 to 133 are only available with Version 2.09 and higher
(microprocessor code).
Location 126 - Premise server dealer ID
Location 126 has ten segments of numerical data (default 0 0 0 0 0 0 0 0 0 0).
Contact your premise server administrator for IP information to program this
location.
Location 127 - Premise server IP address
Location 127 has four segments of numerical data (default 0 0 0 0). Contact your
premise server administrator for IP information to program this location.
Location 128 - Proxy server IP address
Location 128 has four segments of numerical data (default 0 0 0 0). Contact your
premise server administrator for IP information to program this location.
Note: If the proxy server is present, it supersedes the value in Location 127.
Location 129 - Premise server router IP address
Location 129 has four segments of numerical data (default 0 0 0 0). Contact your
premise server administrator for IP information to program this location.
Location 130 - Premise server proxy server port
Location 126 has four segments of numerical data (default 0 0 8 0). Contact your
premise server administrator for IP information to program this location.
Location 131 - DHCP assigned IP address
Location 131 has four segments of numerical data (default 0 0 0 0). This location
displays the DHCP assigned IP address. This is a read-only location.
Location 132 - UCSIMM software version
Location 132 has one segment of numerical data. This is a read-only location.
Location 133 - PIC software version
Location 133 has one segment of numerical data. This is a read-only location.