Interlogix NX-590NE - Manual (Page 18)

16 NX-590NE Internet Interface Installation Manual
Location 2
– Partitions reporting via TCP/IP to receiver 2
Location 2 has 16 segments of feature selection data. Use this location to
program the partitions to include when reporting over the Network. If you want to
exclude any partition from reporting, turn off the LED corresponding to that
particular partition (1 = Partition 1, 2 = Partition 2, etc.) and no event from that
partition will report via the network regardless of what is programmed elsewhere.
Table 5 on page 15 describes the types of reports found in Segments 1 to 16.
Location 3
– Partitions reporting via e-mail to account 1
Location 3 has 16 segments of feature selection data. Use this location to
program the partitions to include when reporting over the TCP/IP to e-mail
account 1. If you wish to exclude any partition from reporting, turn off the LED
corresponding to that particular partition (1 = Partition 1, 2 = Partition 2, etc.) and
no event from that partition will report via the network regardless of what is
programmed elsewhere. Table 5 on page 15 describes the types of reports found
in Segments 1 to 16.
Location 4
– Partitions reporting via e-mail to account 2
Location 4 has 16 segments of feature selection data. Use this location to
program the partitions to include when reporting over the TCP/IP to e-mail
account 2. If you wish to exclude any partition from reporting, turn off the LED
corresponding to that particular partition (1 = Partition 1, 2 = Partition 2, etc.) and
no event from that partition will report via the network regardless of what is
programmed elsewhere. Table 5 on page 15 describes the types of reports found
in Segments 1 to 16.
Locations 5 to 7 - SMTP e-mail authentication
Locations 5 to 7 have one segment of character data. Use these locations to
program SMTP e-mail authentication user ID and password.
• Location 5 - SMTP e-mail authentication user ID (characters 1 to 16).
• Location 6 - SMTP e-mail authentication user ID (characters 17 to 32).
Default is Security.
• Location 7 - SMTP e-mail authentication password (16 characters).