GTCO Cordless Roll-Up - Users Guide - Manual (Page 33)

Cordless Roll-Up 33
9. If GTCOTEST indicates that the digitizer is functioning properly, check your software
application setup and SuperSet code for accuracy. If you have any questions about
your results or need assistance running GTCOTEST, contact our Technical Support
Department.
Cordless Roll-Up Technical Specifications
Dimensions/Weight Active Area
30” x 36”
36” x 48” Footprint
35” x 44”
41” x 56” Weight
6 lbs.
7.25 lbs. Avg. Ship Wt.
17 lbs.
21 lbs.
Technology
Electromagnetic
Resolution Up to 2000 lpi (lines/inch) or 100 lpmm (lines/millimeter)
Lock Height 0.5 inch (12.7 mm)
Coordinate Origin Selectable (Factory default: lower left corner)
Recommended Roll Diameter 8 inches (200 mm)
Operating Temperature
41° to 115° F (5° to 46° C)
Storage Temperature -4° to 158° F (-20° to 70° C)
Humidity Range 0% to 100%, non-condensing
Operating Modes Point, Line, Continuous, Line Incremental, Continuous
Incremental, Remote Request
Baud Rates 1200, 2400, 4800, 9600, 19200 and 38400
Transducer Switches Rated life over 1 million actuations
Transducer Battery Life Approximately 350 hours of continuous use
Stylus Battery AAA Battery
Cursor Battery 3.5V 750mAH lithium (Eagle-Picher LTC-7PN-S4 or
equivalent)
Emulations GTCO T5A, CalComp 9100/9500, Summagraphics
Microgrid and ID Series
Power Supply Output voltage +9VDC at 500mA, Center positive
Interface RS-232C (See Figure 4)
Adapter 9- to 25-pin (See Figure 5)