GTCO Cordless Roll-Up - Users Guide - Manual (Page 22)

Cordless Roll-Up 22
7. After making your selections, you can save the configuration as a temporary
configuration or save the configuration in a user-definable location for later recall,
To save the configuration temporarily:
Select on the SuperSet Menu. You will hear four short tones when you successfully
save a configuration. The configuration is saved in a temporary location, where it will be
retained even if the unit is powered off or reset. However, if another SuperSet code is
entered, this temporary configuration is lost and cannot be recalled without configuring the
Cordless Roll-Up again.
To save the configuration in a user-definable location:
Choose and then select a two digit value ranging from 90 to 99 on the SuperSet Menu.
You will hear four short tones when you successfully save a configuration. Saved
configurations allow you to switch between applications quickly. Locations 90 through 99
retain configurations even if the Cordless Roll-Up is turned off or reset.
8. The configuration setup is now complete. Store the Custom Configuration Menu
card in the tablet housing.
Custom Configuration Menu
Click on menu blocks for description of each menu option group: