FingerTec DiGiTime (OEM) - Manual (Page 86)

85 CONTENTS
Step 3: Click to select the drive of the USB pen drive, for example: G.
You can select the range of users by using Terminal ID or Department. Select either one to
continue. Click “From PC” to continue.
Step 4: You can select users to upload by selecting the column next to the User ID. However,
you can select “All” to upload. Click “Save to USB” to upload users into Software.
DOWNLOADING CLOCKING DATA FROM USB PEN DRIVE
You can plug a USB pen drive into the terminal to download the clocking data. The download-
ed clocking data is read by the software to do further analysis. Please always delete clocking
data manually at the terminals after you have finished downloading all clocking data into a
USB pen drive. To read clocking data from a USB pen drive, follow the steps below.
Step 1: Click to open USB Pen Drive Management.