FingerTec DiGiTime (OEM) - Manual (Page 24)

23
Note: Please do not quit the software,
or disconnet terminal from the soft-
ware during the downloading process.
Interruptions will cause the incomplete
download process and data loss.
CONTENTS
[4] Uncheck irrelevant termi-
nal IDs.
[5] Click “OK” to proceed.
Data in the terminal will be cleared after downloading process is complete. The process is auto-
matic to avoid data loss and overflowing of data.
AUTOMATIC DOWNLOADS
[1] Click and select “Set Automatic Download interval”
[2] The automatic download
interval can be predefined
by:
Seconds
Minutes (Download process
will only start when it is ap-
proaching the pre-defined
clocking time. In case of
10 minutes, if the pre-de-
fined IN time is 9:00am,
download process will start
10 minutes before 9:00am
which is at 8:50am and 10
minutes after 9:00am which
is at 9:10am. This is differ-
ent with normal minute in-
terval.)
Specific timer
[3] Click “Apply” to save settings.
You can select to use all 3 types of download intervals at the same time. All 3 download intervals
will not interrupt each other during download process.
Clearing Data in Terminal
If you want to use the terminals for access control only without checking any access details of
users, choose to clear logs from the terminal. You do not need to download logs into the soft-
ware, instead delete logs directly from the terminal. However, it is important to take note that the
deleted transaction logs cannot be retrieved by all means.
Ignore this step if the Company wants clocking data of all users of the terminals.