FingerTec DiGiTime (OEM) - Manual (Page 77)

76 CONTENTS
Configuring Access Zone
Ignore this step if you do not install 2 terminals to control an entrance. In some scenario, two
terminals are installed in and out to control accessibility of a door. User must verify whenever
he enters or leaves the zone. The record will be captured and you can always refer to Entry-
Exit report to check for the details. All IN and OUT records are arranged in pair to ease the
checking. You need to define the IN and OUT terminals for a zone before you can start using
it. Follow the steps below to configure.
Step 1: Click to open Configure Access Zone.
Step 2: Define the name of the zone, for example, R&D. All connected terminals will be dis-
played on the left panel for reference.
Step 3: Name the door location to ease checking process. Select the terminal as ENTRY
Terminal and EXIT terminal. Repeat the steps above to add in more Entry-Exit terminals. Click
“Apply” to save the settings.