FingerTec DiGiTime (OEM) - Manual (Page 65)

64
Access Code Name Group Time Zone Time Zone
0 Access from 8am to 8pm 1 2
1 Only access during office hour 2 3: 4: 5
2 Access in the morning only 3 6
3 Access only after working hour 4 7
4 Access only after 8pm 5 8
5 Part time workers Free group 11 : 12 : 13
6 Contractors Free group 18: 20
Note: All new enrolled users
are automatically assigned into
Group Time Zone 1. Please
assign the new users into the
corresponding group time zone
after the enrollment is done.
CONTENTS
Access Code: All defined group duty rosters are linked to a code number for easy handling.
These code numbers are known as Access Code. By default, there are 50 Access Codes (from
0 ~ 49) and by default as well, Access Codes 0 to 4 are applied to Group Time Zone 1 to 5. Any
other “free group time zone” are assigned with Access Codes 5 to 49.
You can arrange the level of accessibility by Access Code, for example:
• Access Code 0 – Full access
• Access Code 1 – Only access during office hour
• Access Code 2 – Access in the morning only
• Access Code 3 – Access after working hour
• Access Code 4 – Access after 8pm only
• Access Code 5 – Part time workers (midnight)
• Access Code 6 – Contractors (Morning before 10am)
Furthermore, you can name the Access Code so that you can refer them easily.
For example:
THE SETTINGS OF TIME ZONE
Step 1: Click to open Terminal User Control.
Step 2: Select a Terminal ID to configure, for example Terminal 1. Click Time Zone tab.
Step 3:
For example: User can access from 8:00am to 8:00pm (Monday to Friday), but are denied
access during Saturdays and Sundays. The time zone settings will be configured as below: