Flexi-working roster – FingerTec DiGiTime (OEM) User Manual
Page 39
38
Time (Monday
In
Lunch Resume Dinner Resume
Out
to Friday)
9:00am 12:30pm 1:30pm 6:00pm 7:30pm 10:30pm
Time (Saturday) 10:00am
1:30pm
In
Break
Resume
Out
Time (Monday to Saturday) 11:00pm 3:00am 4:00am 6:00am
If you are entitled to 2 breaks per
day, and you wish the software
captures both break times,
for example:
Lunch and Dinner, you can refer to the steps above, but you have to do a different
setting in step 3. Check the following steps.
Configure
the
time into the
corresponding
time
slots.En-
able the option
“Do you want
to use OT/Done
as
scheduled
work instead of
overtime”. All OT
calculation only
starts after Done
time (10:30pm).
If you would like to configure overnight working hours similar to below:
You can refer to the steps above, but
you have to do a different setting in
step 3. Please see below.
FLEXI-WORKING ROSTER
Some companies apply flexi-working hours. There are no fixed times for checking in or check-
ing out, going for lunch or resume working. Users can come to work anytime or leave any time.
To configure flexi-schedule, check the following steps.