FingerTec DiGiTime (OEM) - Manual (Page 48)

47
Clocking
In Break Resume Out
schedule
Morning shift 3 8:00am 12:00pm 1:00pm 4:00pm
Evening shift 4 4:00pm 8:00pm 9:00pm 12:00am
Night shift 5 12:00am 4:00am 5:00am 8:00am
For example:
A factory provides 3 working shifts as below:
CONTENTS
Step 6: The software automatically arranges the roster according to your settings. Click
“Save” to save settings.
Step 7: A new group is created. Click “Close” to save settings.
OPEN WORKING ROSTER
Some factories apply open working roster. There are various shifts in a day, and users are
free to attend to any shift. The software will allocate users into corresponding working shift
by checking into their clocking time.
However, the working time of every
shift should not be overlapped and
must be clearly defined. The soft-
ware cannot allocate users into the
correct shift if the In time and Out
time of the shift are overlapping.
Step 1: As de-
scribed in Chap-
ter Multi-Shift
Working Roster,
you can config-
ure 3 clocking
schedules
by
the same meth-
od.