Loading custom-sized media into tray 2 – HP LaserJet 4610n User Manual

Page 95

Text mode
Original mode

Loading custom-sized media into Tray 2

The Custom media menu will be displayed when the Tray 2 switch is in the Custom size
position. You must also change the size setting on the control panel to custom and set the
unit of measure, X dimension, and Y dimension. See

To configure a tray to match print job

settings

for more information.

1. Remove tray from the printer.

2. Move the tray switch to the CUSTOM size position. Once a custom size is set for a tray,

it will be retained until the switch is moved back to STANDARD or until you manually
change the configuration.

3. Slide the media width guides all the way open and adjust the rear media-length guide to

the length of the paper being used.

ENWW

Configuring input trays