HP LaserJet 4610n - Manual (Page 151)

Control panel message Description Recommended action
Canceling... The printer is in the process of canceling
a job. The message will continue to be
displayed while the job is stopped, the
paper path flushed, and any remaining
incoming data on the active data
channel is received and discarded. No action necessary.
CARD SLOT X NOT
FUNCTIONAL
The flash card in slot X is not working
correctly. 1. Turn the printer off.
2. Remove the card from the slot
indicated and replace with a new
card.
Checking paper path The engine is turning its rollers to check
for possible paper jams. No action necessary.
Checking printer The engine is doing an internal test. No action necessary.
CHOSEN PERSONALITY
NOT AVAILABLE
To continue press
alternates with
CHOSEN PERSONALITY
NOT AVAILABLE
For help press
PJL encountered a request for a
personality that did not exist in the
printer. The job is aborted and no pages
will be printed. 1. Press for detailed information.
2. Press and to step through the
instructions.
3. Reprint using the correct driver for
the device.
Clearing event log This message is displayed while the
event log is cleared. The printer will exit
the MENUS once the event log has been
cleared. No action necessary.
Clearing paper path The printer jammed or detected
misplaced paper when turned on. The
printer is attempting to eject jammed
pages automatically. No action necessary.
CLOSE FRONT COVERS
For help press
The covers need to be closed. Close front covers.
NOTE
This message might also appear if the
fuser is missing or incorrectly installed.
Ensure that the fuser is correctly installed.
DATA RECEIVED
To print last page press
alternates with
Ready
To print last page press
The printer received data and is waiting
for a form feed. When the printer
receives another file, the message
should disappear. Press to continue printing.
Deleting... The printer is currently deleting the
stored job. No action necessary.
Control panel messages (continued)
ENWW Control panel messages 139