HP LaserJet 4610n - Manual (Page 212)

7. Align the formatter board in the tracks at the top and bottom of the slot, and then slide
the board back into the printer. Replace and tighten the eight screws removed in step 4.
8. Reconnect the power cable and interface cables, and turn the printer on.
Enabling memory
If you installed a memory DIMM, set the printer driver to recognize the newly added memory.
To enable memory for Windows 2000 and XP
1. On the Start menu, point to Settings, and click Printers or Printers and Faxes.
2. Right-click the printer and select Properties.
3. On the Device Settings tab, click Printer Memory (in the Installable Options section).
4. Select the total amount of memory that is now installed.
5. Click OK.
200 Appendix A Working with memory and print server cards ENWW