HP LaserJet 4610n - Manual (Page 61)

Changing printer control panel configuration settings
By using the printer control panel, you can make changes to general printer configuration
default settings such as tray size and type, PowerSave time, printer personality (language),
and jam recovery.
CAUTION Configuration settings seldom need to be changed. Hewlett-Packard recommends that only
the system administrator change configuration settings.
Job storage limit
This option sets the limit for the maximum number of jobs stored on the printer memory at
the printer.
NOTE You must have additional memory installed in the printer to use the job storage feature. The
memory that comes standard with the printer is not sufficient to support the job storage
feature.
To set the job storage limit
1. Press M
ENU
to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to select JOB STORAGE LIMIT.
7. Press or to change the value.
8. Press to set the value.
9. Press M
ENU
.
Job held timeout
This option sets the period of time that the system keeps files in job storage before deleting
them from the queue. The default setting for this option is OFF; the other available settings
are 1 HOUR, 4 HOURS, 1 DAY, and 1 WEEK.
ENWW Changing printer control panel configuration settings 49