HP LaserJet 4610n - Manual (Page 55)

Menu item Values Description
POWERSAVE TIME 1 MINUTE
15 MINUTES
30 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Reduces power consumption when
the printer has been inactive for the
period of time specified by this item to
reduce wear on electronic
components in the printer. The printer
automatically comes out of
POWERSAVE mode when a job is
sent to the printer.
The default is 30 MINUTES.
PERSONALITY AUTO
PDF
PCL
PS
MIME
Sets the default personality to
automatic switching, PCL, PDF, or
PostScript emulation. The default is
AUTO.
CLEARABLE WARNINGS ON
JOB
Sets whether a warning is cleared on
the control panel or when another job
is sent.
JOB: The clearable warning message
appears until the end of the job that
generated the message.
ON: The clearable warning message
appears until you press (
S
ELECT
).
The default is JOB.
AUTO CONTINUE OFF
ON
Determines printer behavior when the
system generates an Auto
Continuable error.
ON: If an error occurs that prevents
printing, the message appears on the
printer control-panel display, and the
printer goes offline for 10 seconds
before returning online.
The default is OFF: If an error occurs
that prevents printing, the message
remains on the printer control-panel
display, and the printer remains
offline until you press (
S
ELECT
).
The default is ON.
SUPPLIES LOW STOP
CONTINUE
Sets low supplies reporting options.
The default is CONTINUE.
COLOR SUPPLY OUT AUTOCONTINUE
BLACK
STOP
Sets the COLOR SUPPLY OUT
printer behavior. When a color supply
is empty and the printer is set to
AUTOCONTINUE BLACK, the
printer will continue printing using
black toner only.
ENWW Configure device menu 43