Comtrol AT Commands for SmartACFL User Manual
Page 97

Command Reference Manual
100722A
Conexant
3-77
3.3.3.40 S210 – V.34 Symbol Rates
The bits in this parameter control V.34 symbols rates and enables/disables V.34 asymmetric rates. This parameter is used for
diagnostic purpose only.
Default: 13 (0Dh) (00001101b)
Bits 0 -2
Selects the range of allowed V.34 symbol rates.
2
1
0
Symbol Rates (baud)
0
0
0
=
2400 only
0
0
1
=
2400 only (no 2734)
0
1
0
=
2400, 2800
0
1
1
=
2400, 2800, 3000
1
0
0
=
2400, 2800, 3000, 3200
1
0
1
=
2400, 2800, 3000, 3200, 3429 (Default.)
Bit 3
Enable/disable V.34 asymmetric rates.
0 =
Disable asymmetric rates
1 =
Enable asymmetric rates (Default.)
Bits 4-7
Reserved.
Examples
S210=13
Enable asymmetric rates with all symbol rates available (Default.).
S210=5
Disable asymmetric rates with all symbol rates available.
S210=8
Enable asymmetric rates with only 2400 baud available.
S210=11
Enable asymmetric rates with 2400 to 3000 baud available.