Comtrol AT Commands for SmartACFL User Manual
Page 22

Command Reference Manual
3-2
Conexant
100722A
3.2.1.2 +FCLASS - Select Active Service Class
This command selects the active service class (mode).
Syntax
+FCLASS=
Defined Values
Decimal number which corresponds to the selected service class.
0
Select Data Mode (see Section 1). (Default.)
1
Select Facsimile Class 1 Mode. (See Section 3.)
1.0
Select Facsimile Class 1.0 Mode. (See Section 3.)
2
Select Facsimile Class 2 Mode. (See Section 1.)
8
Select Voice Mode. (See Section 5.)
10
Select DataDome. (Fax for Japan.)
Result Codes
OK
For
ERROR
Otherwise.
Reporting Current or Selected Values
Command: +FCLASS?
Response:
+FCLASS:
Example:
+FCLASS: 0
For the default setting.
Reporting Supported Range of Parameter Values
Command: +FCLASS=?
Response:
+FCLASS: (
Example:
+FCLASS: (0,1,1.0,2,8,10)
3.2.1.3 +VCID - Caller ID (CID)
This command controls the reporting and presentation of data associated with the Caller ID services in the Incoming Call Line
ID (ICLID) data format for the next call.
Syntax
+VCID=
Defined Values
Decimal number corresponding to the selected option.
0
Disable Caller ID reporting. (Default.)
1
Enables Caller ID with formatted presentation to the DTE. The modem presents
the data items in a
name, and caller code (telephone number),
2
Enables Caller ID with unformatted presentation to the DTE.
Reporting Current or Selected Values
Command: +VCID?
Response:
+VCID:
Example:
+VCID: 0
For the default setting.
Reporting Supported Range of Parameter Values
Command: +VCID=?
Response:
+VCID: (
Example:
+VCID: (0-2)