beautypg.com

Conexant – Comtrol AT Commands for SmartACFL User Manual

Page 147

background image

Command Reference Manual

100722A

Conexant

6-3

6.1.2

Shielded Codes Sent to the Modem (DCE)

Table 6-3 lists the supported shielded codes sent to the modem in the expression . The number in
parenthesis in the second column corresponds to the T.50 equivalent.

Table 6-3. Supported Shielded Codes Sent to the Modem (DCE)

Code

Code

Simple Action Command Description

(1/0)

Two contiguous codes indicate a single in the data stream
("Immediate Command" or "Stream Command").

u

(7/5)

[Action Numbers 0 and 3] Increase the volume or gain by one unit ("Immediate
Command").

d

(6/4)

[Action Numbers 1 and 4] Decrease the volume or gain by one unit ("Immediate
Command").

p

(7/0)

[Action Number 9] Pause.

r

(7/2)

[Action Number 10] Resume.

(0/3)

[Action Number 11] End Voice Transmit State ("Stream Command").

(1/8)

[Action Number 12] Clear transmit buffer of voice data ("Immediate Command").

!

(2/1)

[Action Number 15] Receive abort ("Immediate Command").

This manual is related to the following products: