Comtrol AT Commands for SmartACFL User Manual
Page 160

Command Reference Manual
6-16
Conexant
100722A
6.2.2.13 +VTD - Beep Tone Duration Timer
This command causes the modem to set the default DTMF/tone generation duration.
Syntax
+VTD=
Defined Values
Decimal number specifying the default DTMF/tone generation duration in units of 0.01 second. A
value of 0 specifies the value entered by the S11 parameter (50-255 ms). The range is 0.01 to
2.55 seconds for
Reporting Current or Selected Values
Command: +VTD?
Response:
Example:
100
For the default setting.
Reporting Supported Range of Parameter Values
Command: +VTD=?
Response:
(
Example:
(0-255)
Result Codes
OK
ERROR
Otherwise, or if not in Voice Mode.
This manual is related to the following products: