Toshiba TEC MA-315-100 - Manual (Page 92)

E01-11069
Operations and Manager Intervention Status
OPERATION
MGR Position Reference
(See Chapter “22. System
Option Setting".) Not required Required
Credit Balance (over-
subtraction of the sale by
[DOLL DISC], [VOID],
[STR CPN], or [VNDCPN]
keys)
Address 2 - Bit 3
Negative Department or
negative PLU Entries
Address 5 - Bit 4
Negative-balance Sale
Finalization by Non-cash
Media Keys.
Address 5- Bit 5
Listing Capacity Release
Listing Capacities (amount limits) may be programmed on Departments (each open-price PLU is
ruled by the Listing Capacity of its link Department). These LCs (Listing Capacities) are
programmed to check an excessively high amount entry by cashier’s mistake at the earliest
stage. Guide your cashiers as in the following procedure:
1) During sale entries by a cashier, an error occurs when a Department or PLU item has
entered.
I
2) The cashier clears the error by the [C] key. The cashier confirms the amount and operates
the item again.
I
3) If the same error occurs again, the cashier attempts to enter the amount using the
[LC OPEN] or [OPEN] key, allowing two further digits for an entry.
I
4) If the operation results in an error again. It means that the amount still cannot be entered by
the [LC OPEN] or [OPEN] key function.
5) The cashier calls for Manager Intervention.
4
The procedure thereafter is the same as Steps 2) to 7) for the Items programmed to require
Manager Intervention on the preceding page.
Reference: For reading the Listing Capacity of each Department:
Chapter 23. Program Data Verification, -- Department LC and Status Read -
For setting the Listing Capacities of specific Departments:
Programming Department Status on page 40.
- 9 0 -