Toshiba TEC MA-315-100 - Manual (Page 34)

E01-11069
*1. At least one Department Key is required to be installed.
*2. The [H^/NS] key has both /#J and [NSJ functions. Therefore, when is installed,
neither /#7 nor [NSJ are necessary.
*3. Whether the key assigned with Key Code 115 will be (FS/MJ or [GST/M] is decided by
Chapter 22. System Option Setting, Address 14^ BItl selection.
*4. When the Signing Method is selected for cashier identification (refer to Chapter 17), this
key must be installed. In other cashier identifying methods, this key merely functions as
receipt issue/non-issue key.
Key Installation Setting
Condition for Setting: After all Daily and Periodical Resets
(refer to “WOTE on Condition’* on page 23.)
Setting Procedure:
Use the S Key to turn the Control Lock to the ‘'BLIND” position.
X MGR
(The BUND position is the unmarked
step next
to “Z”.)
50-^EI
To declare Key Installation
Setting.
Only to reed the Key Code currently set on the Key.
Key Code
(max. 3 digits; see
the List of Keys on
the preceding page.)
□
Displays the
entered Key Code
in the AMOUNT
pordon, as it is
entered.
Repeat for all the
keys to be newly
installed, tor location
changes, or for
reading Key Codes
already set
H
Depress the key
to be set with the
Key Code.
Displays the Key
Code set or read, in
the AMOUNT portion
Depress the [AT/TL] key
to complete the Key
Installation Setting
operation.
- 3 2 -