Toshiba TEC MA-315-100 - Manual (Page 27)

EOl -11069
NOTES 1.
2.
3.
For Tax 2 table setting in a multhtax area, follow the same procedure in 1), 2), or
3) above, using the [TX2/M] key instead of [TX1/M].
To install the [TX2IM] key on the keyboard, refer to Chapter “75. Optional Key
Setting”.
If two tax tables are to be set, the Tax 1 table must be set first. The Tax 1 table
setting will automatically reset the old Tax 1 and Tax 2 tables. The Tax 2 table can
be set only when the Tax 1 table has been set (i.e., the Tax 2 table alone cannot
be set without setting the Tax 1 table).
No second depression of the [ST] key is allowed within one tax table setting. A
maximum of 64 breaks may be entered for Tax 1 and Tax 2 tables altogether.
Setting Examples:
ex. 1) Tax 1; Full Breaks
Tax Table
Amount Range Tax Levied
$0.00 to $0.10 00
$0.11 to $0.22 10
$0.23 to $0.39 20
$0.40 to $0.56 30
$0.57 to $0.73 40
$0.74 to $0.90 50
$0.91 to $1.08 60
... "A” Break
$1.09 to $1.24 70
$1.25 to $1.41 80
$1.42 to $1.68 90
$1.59 to $1.74 100
$1.75 to $1.91 110
$1.92 to $2.08 120
... “B” Break
Key Operation
Control Lock: SET
□0
00
00
00 00
000
TX1/M
TX1/M
TX1/M
TXI/M
TX1/M
TXI/M
TXI/M
000
000
000
000
000
]00
IAT/TL
I
Thank you
Call again
1 1 . - 0 a - 9 2
No 1 1 2 . 3 0 0
TX I
0 . 0 *
0 0
★
a i 0
0 1 ★ 6 2 2
0 2 ★ 6 3 0
0 3 ★ 6 5 6
0 4 ★ 6 7 3
0 5 ★ 6 9 0
0 6 ★ 1 0 8
★ 1 0
8 ST
0 7 ★ 1 2 4
0 8 ★ 1 4 1
0 9 ★ 1 5 8
1 0 ★ 1 7 4
1 1 ★ 1 9 1
1 2 ★ 2 . 0 8
★ 2 , 0
8 TL
0 0 1 . 6
0 8 - 5 4
- 2 5 -