Control lock and control keys, Control keys, Control lock – Toshiba TEC MA-315-100 User Manual
Page 14: Position) (function), Control keys control lock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11069
7. Control Lock and Control Keys
Control Keys
There are four types of Control Keys: the REG key, the MGR key, the MA
key, and the S key.
REG Key:
The REG key is used by the cashier or clerk who operates ordinary
transaction entries. This key can access the positions of
OFF
and
REG
of the Control Lock.
MGR Key:
The MGR Key is used by the store manager. This key can access the
positions of
OFF, REG, X,
and
MGR.
MA Key:
SKey:
The MA Key is used by the owner who will daily supervise the collection
of money and printout of transactions recorded by the register. This key
is also used by programmer. This key can access the positions of
SET,
OFF, REG, X, MGR,
B, and
Z.
The S key is used by the owner. This key can access any position
including
BLIND
of the Control Lock. However, to prevent programmed
data and sales data from being changed by mistake, use the REG, MGR,
or MA keys for transaction entries or report taking purposes.
Control Lock
The Control Lock has eight effective positions for different modes of
operation, which are accessed by the appropriate Control Keys.
(position)
(function)
X
MGR
SET • • ■ The register allows programming operations.
REG \ / p,
Ly “
OFF
. . . Nothing appears on the display in this position. However,
Qpp___ A_______
2
the power is being supplied to the register.
___
REG
. . . Ordinary transaction entries are carried out in this mode.
SET T
b
L
i
ND
j
Displays the current time while no entries are under way.
X
............... The sate totals in memory can be read (X reports) and the
^
*
programmed data can be verified in this position.
MGR
. . . This position allows to enter operations requiring Manager
Intervention as well as all ordinary transaction entries to be
carried out in the “REG” mode.
B . . . . This is the “Negative Mode” position, which makes entered
data processed reversely to the REG or MGR mode. It is
used to cancel or adjust sates data already finalized.
Z
............... All the resettable totals and their respective counters in
memory will be read and reset in this position (Z reports)
BLIND
. The register allows special programming operations and
memory clear operations.
- 12 -