Toshiba TEC MA-315-100 - Manual (Page 84)

EOI-11069
Sale Paid in Foreign Currencies CURl| CUR2| CUR3| CUR4
(Foreign Currency Keys)
Foreign currencies may be tendered for payment of a sale. A maximum of four Foreign Currency
Keys are available; the
[CURS] and [CUR4] keys are Optional Keys. One currency should be
assigned for each key.
Programming Foreign Currency Keys
Before operating the keys, the following programming operations are necessary.
Setting Foreign Currency Exchange Rate:
Set the exchange rate of the currency. Change the rate daily, if necessary.
Condition: Any time outside a sale. Must be signed off in the Cashier Signing Method.
Programming Procedure:
Use the MA Key to
turn the Control Lock
to the
“SET” position.
X MGR
□ □□□□□[ □□□[
Exchange Rate; max. 10 digits, 0.000001 to 9999.999999) NOTES 1, 2
]□□□ □ □□□□□□
—
]□□□ □ □□□□□□
—
]□□□ □ □□□□□[
CUR1
CUR2
CUR3
CUR4
NOTES 1. Obtain the rate by calculating in the subsidiary currency unit values for both the
domestic and the foreign currency. (In case of calculating' the rate from the
domestic to a foreign currency with the same zero-suppress form, such as
from U.S. $ to French Franc, it will be no problem. However, in case of
exchanging from a domestic currency such as U.S. $ to a foreign currency
such as Japanese yen, this rule must he obeyed; otherwise a wrong rate will
result.)
2. Calculate the required foreign currency value equivalent to the domestic
currency value Then the obtained value is the Exchange Rate value to be
entered in the setting operation above.
Example) Domestic Currency is US$:
1C - xxxx.xxxxxx
= xxxx.xxxxxx
= xxxx.xxxxxx
etc.
\_____ _____ i
centimes (French Franc)
pfennigs (Deutsche Mark)
yen (Japanese yen)
Enter this value as the foreign currency exchange rate.
3. If “0” is set as the exchange rate, that key cannot be used in sale entries.
- 8 2 -