Periodical all cashier read (x) report, Periodical reset reports, Periodical financial reset (z) report – Toshiba TEC MA-315-100 User Manual
Page 101: Periodical all cashier reset (z) report, Report sample format
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EOI-11069
Periodical All Cashier Read (X) Report
(regardless of any Cashier Identifying method; Signed-OFF condition is required for Signing
Method )
The drawer opens
&
Use
MGR
or
MA Key.
X MGR —
REG
OFF
SET
B
ATfXL
“4” is fixed for
Periodica) All
Cashier Read.
I If an error occurs:
!• Is the register signed-
I OFF?
Report
Starts
See page 104 for
sample formaf.
Sales data recorded for the period by each cashier.
{Cashiers with zero sales data are not printed but their cashier codes,)
Periodical Reset Reports:
Periodical Financial Reset (Z) Report
Use
MA Key.
The drawer opens
&
AT/TL
"
20
” is fixed for
Periodical
Financial Reset
Report
Starts
See page 100 for
sample format
Department Sales Data &
Financial Sales Data for the period
Periodical All Cashier Reset (Z) Report
(regardless of any Cashier Identifying method; Signed-OFF condition is required for Signing
Method )
The drawer opens
&
Use
MA Key.
Report
Starts
See page 104 for
sample format
SET
Sales data recorded for the period by each cashier.
(Cashiers with zero sales data are not printed but their cashier codes.)
Report Sample Format
On the following pages are sample formats of respective reports. In referring to those formats,
please note the following conditions:
•
In each report format, all the items that can be programmed to print are placed. (Refer
to ''Selecting Print/Non~print Items on Reports" on the second page of this chapter
for further information )
•
•
The data contents are merely examples to show the report format. The numeric data
may not balance correctly. (Refer to the “Memory Balance" attached to the Daily
Financial Read or Reset Report.) Neither the programmed contents nor sales data
placed as examples in various operating procedures in Chapter “18. Setting Preparation
of Each Key and Transaction Entries" nor any other chapters are related to the numeric
data in the report formats.
- 99 -