R off” (receipt off) lamp status change operations, Receipt-issue/non-issue selection – Toshiba TEC MA-315-100 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EOl-11069
18. Setting Preparation of Each Key, and Transaction
Entries
This chapter describes individual key operations on transaction entries, and
setting requirements for the key if necessary.
Receipt-issue/Non-issue Selection
(
log
/
receipt
Key)
Receipts are issued or not issued according to the "R OFF" triangular lamp illuminated/
extinguished status on the Operator Display panel.
"R OFF” (Receipt OFF) Lamp Status Change Operations
any position except
OFF.
LOG 1
in
RECEIPT!
LOG 1
Extinguished
receipt
!
Receipt ON
Status
if:-
tltuminated
Receipt OFF
Status
NOTES 1.
2
.
3.
4.
The Control Lock may be in any position (except OFF position) for changing the
Receipt ON/OFF status in the signed^ON or signed-OFF condition.
The "f? OFF” lamp status at the starting of a transaction entry decides whether a
receipt will be issued for the transaction or not Switching the Receipt ON/OFF
status during a transaction wilt not be effective.
If a transaction entered with the **R OFF” lamp extinguished and knalized but a
receipt is required, the [RECEIPT ISSUE] (Post-issue Receipt) key can be operated
to issue a receipt (see “Post-issue Receipt" on page 85).
Simply depress the [LOG/RECEIPT] key without a numeric entry. If the key is
depressed with a prior numeric entry in “REG”, “MGR”, or
“El”
mode, it may turn
out to be a Sign ON or Sign OFF operation when the Singing Method is selected for
cashier identification (refer to the preceding chapter). However, if any Declaration
Key (such as [RTN MDSE]) is already pressed and then the [LOG/RECEIPT] key is
pressed, the Declaration Key entry is not canceled by the Receipt ON/OFF status
change.
- 3 8 -