Toshiba TEC MA-315-100 - Manual (Page 138)

EO1-11069
All Memory Clear
If the register becomes completely inoperative due to battery discharge or malfunction of the
program memory, the All Memory Clear operation must be carried out. When an Ail Memory
Clear is operated, all the memory contents that have been stored in the RAM will be cleared (i.e..
the programmed data and the sales data). Along with the clearing process, the designated zero-
amount format is set and “Initial Data" and “Initial Status” for respective programming items are
automatically set.
Warning: This clear operation deletes all programmed data and sales data stored in the
register’s memory. (i.e., a register goes back to initial status.)
Operating Procedure
Condition: Any time, outside or during any operation sequence except during Key Setting or
Key Location Changing (Chapter 15) or System Option Setting (Chapter 22).
Operation: X
Use the S Key to turn the
Depress the following Numeric Key according to the display and print format for zero
amount:
Numeric Key
Zero-amount
Format
EH
0 0 0
•
EH
0
•
for use in US or Canada
Depress the | a TA^ key.
An Alt Memory Clear receipt is issued.
All Memory Clear Symbol Line
(39 for Numeric 39, or 19 for Numeric 19)
Receipt Consecutive No. is reset
to 0001.
Thank you
Call again
11.- 0 a - 9 2
No 11 a 3 0 0
3 9 A a o 0
0 0 0.1
1 3 - 0 4
(Date and Time remain unreset)
Zero-amount D/sp/ay & Pnnt Format designated herer
Register No. is reset to zero. But No. 0 is printed from the next receipt on.
NOTES 1. When a All Memory Clear is operated, the condition "after all sates data reset”
is obtained, just as “Status Clear" or “Sales Memory Clear". Therefore, no
Reset Reports need to be taken for starting any programming operation.
- 1 3 6 -