Toshiba TEC MA-315-100 - Manual (Page 61)

EOl-11069
% Key Operations in Sale Entries
Use the REG Key to turn the
Control Lock to “REG”.
MGR
REG
OFF
SET
□
(The Percent Discount
operation requires the MGR
position if so programmed
by System Option.)
% + Operation Patterns
operates the same except that the calculated
% - I amount will subtract from instead of adding to
the sale amount.
Percent Charge on a Department or PLU Item:
% + I
(for the Preset Rate)
Department or PLU
Item Entry
nnfmnnn) ' %+ I (for the Manual Rate)
max. 2 dig. max. 3 dig.
Percent Charge on Sale Total:
Sale Item Entries ST
Manual Rate
% + (for the Preset Rate)
max. 2 dig. max. 3 dig.
% +
(for the
Manual
Rate)
Manual Rate
NOTES 1. When a rate is manually entered through a % key preset with a rate, the manual
rate prevails.
2. A % entry will cause an error if operated after an Other Income Department or
Negative Department entry.
3. A % entry after obtaining a Subtotal is usually allowed only once. However, it can
be programmed to allow multiple times. (Refer to Chapter “22. System Option
Setting”, Address 16 • Bit2.)
4. You can select the rounding process of the fractions of the product (result of
multiplication) -- ROUND OFF (initial setting), ROUND UP, or ROUND DOWN.
(Refer to Chapter “22. System Option Setting”, Address 2 - Bits 1 and 2.)
5. The Percent Discount operation can be programmed to require the MGR position
of the Control Lock. (Refer to “22. System Option Setting”, Address 5 - Bit 3.)
6. Each of the % keys has its own Tax(PST) Status, GST Status, and Food Stamp
Status programmed. Refer to 'Tax Modification” (page 62) and “Food Stamp
Modification” (page 63) for reversing the status.
Example of % Discount on Item Example of % Charge on Sale Total
0 1 * 6.0 0
5.
- 0.3 0
™ -
% -
- Dept. 1 $6.00
I— 5% on $6.00
= $0.30
is discounted
Subtotal $15.00
obtained.
10% on $15.00
= $1.50
is added
- 5 9 -