Toshiba TW56D90 - Manual (Page 43)

Dolby Surround level settings (continued)
To select the Dolby Pro Logic TEST mode
These TEST sequences are designed to let you balance all the speakers
to the same volume level. The method of adjustment described below is
the same for all the Dolby Surround effects (Dolby Pro Normal/Phantom
and Dolby 3 Stereo).
1 Press AUD repeatedly to select
"TEST".
Press - or + to control the level.
The adjustment screen for each
speaker will be displayed for about 2
seconds each in the following order:
LEFT- CENTER -
— REAR ^
RIGHT
□
Adjust the Center (built-in) and Rear
speaker levels to match the Left and
Right speakers while the Center or
Rear adjustment display is on the
screen.
Notes:
• In the "DOLBY PRO LOGIC:
PHANTOM" mode, "LEFT -t- RIGHT"
will be displayed in place of
"CENTER".
Adjustable item is "REAR" only.
• The adjustment screen for the
"REAR" speakers is not displayed in
the "DOLBY 3 STEREO" mode.
Press EXIT to end the TEST.
AUD I O
MTS
8 ASS
TREBLE
BALANCE
SPEAKERS
INPUT BALANCE
TEST
TO SELECT MENU
PUSH AUD
TO CONTROL PUSH -
CENTER
TO CONTROL PUSH -
TO END PUSH EXIT
Note:
The DOLBY SURROUND level settings are only for the CENTER (built-in)
and REAR speakers.
43