Enhancing the surround, Sound effect (continued), Dolby pro logic surround – Toshiba TW56D90 User Manual
Page 40: To select dolby pro logic surround, Enhancing the surround sound effect, Chapter 4 advanced operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CHAPTER 4
ADVANCED OPERATION
Enhancing the Surround
Sound Effect
(continued)
• The realistic sound of the cinema is now available from the Toshiba television. This
amazing three dimensional sound effect is available from any video and laser disc
recorded in Dolby Surround and from an increasing number of TV broadcasts.
• The illustrations on the next page show the surround effects available from the three
modes, and the speakers driven.
Dolby Pro Logic Surround
I
1^
z
3
1
40
To enjoy the Dolby Surround effects of the "DOLBY PRO LOGIC;
NORMAL" and "DOLBY 3 STEREO" features, you have to connect
external speakers (not supplied) to the TV. Be sure to set the MAIN
SPEAKER switch to "EXT". See page 67 for details.
To select Dolby Pro Logic Surround
1
Press
DSP repeatedly until your
desired mode is displayed in
magenta.
DOLBY
PRO LOGIC
iNORMAL
DOLBY
PRO LOGIC
: PHANTOM
DOLBY
Ì
3 STEREO
-R
S'TAD i 1
N i
CÌ..UB
CONCÍIÍ
OF F
V\
HALL
TO SELECT PUSH DSP■DOLBY
If the MAIN SPEAKER switch located
on the TV rear panel is set to the
"INT" position, you will see the
display at the right. Then select the
external speaker position from the
switch.
Press
SPEAKER to select either the
CENTER or REAR speakers to be
adjusted.
The selected mode will be displayed
in magenta.
The CENTER and REAR speakers can
be adjusted separately.
CENTER mode—To adjust the built-
in Center Speakers.
REAR mode—To adjust the Surround
Speakers connected to the REAR
SPEAKER terminals.
Press - or + to adjust the DSP level.
TO ENJOY THIS MODE
TURN SPEAKER SW TO EXT
HOOK UP EXT SPEAKERS
DOLBY
PRO
LOGIC
CENTER
REAR
: NORMAL
TO SELECT PUSH SPEAKER
TO CONTROL PUSH - +
To deactivate the DSP function
Select "OFF" in the DSP mode display.