Kenwood TM-255E - Manual (Page 4)

14 Damage Requiring Service
Enlist the services of qualified personnel in the
following cases:
a) The power supply or plug is damaged.
b) Objects have fallen, or liquid has spilled into the
unit.
c) The unit has been exposed to rain.
d) The unit is operating abnormally or
performance has degraded seriously.
e) The unit has been dropped, or the enclosure
damaged.
INTRODUCTION
CONVENTIONS FOLLOWED IN THIS
MANUAL
The writing conventions described below have been
followed to simplify key stroke instructions and avoid
unnecessary repetition. This format is less confusing
for the reader. Reviewing the following information
now will reduce your learning period. That means
less time will be spent reading this manual; more time
will be available for operating.
instruction Meaning What to (to;:
Press
[KEY1]+[KEY2]. Press the keys
simultaneously. Press and hold
KEY1 down, then
press KEY2.
Press
[KEY1], [KEY2J. Press the keys
in sequence. Press KEY1
momentarily,
release KEY1,
then press KEY2.
Press
[KEY]+ POWER ON.
Press the key
while powering
the transceiver.
With the
transceiver power
OFF, press and
hold KEY, then
turn ON the
transceiver
power.
Press [F] (N s). Press the
Function key for
longer than
N seconds. Press and hold
the function key
until the "F"
indicator on the
Display begins
flashing.
Press [KEY] (N s). Press the key
for longer than
N seconds.
Press and hold
KEY until the
function begins.
Note: Basic procedures are numbered sequentially to guide you
step-by-step. Additional information pertaining to a step, but not
essential to complete the procedure, is provided in bulleted form
following many steps for further guidance.