Kenwood TM-255E - Manual (Page 34)

5 MEMORY FEATURES
MEMORY CONTENTS CONFIRMATION
The contents of a memory channel can be confirmed
in VFO mode or Memory Recall with the following
procedure without changing the receive frequency.
1 Press [M.IN] in VFO mode or Memory Recall.
• "M.SCR" appears indicating Memory Scroll is
selected.
r
------- >
M. CH
ii n o zt n n n
FM n n
U 1
1 Jf Jf. Jf LI LI, LI
S 1 3 S 7 9 “ 40dB
2 4 6 8 10 M.SCR
J
3 Press [M>V].
The displayed data is transferred to the VFO,
and VFO mode is restored. It is now possible
to change the frequency or any other setting.
Pressing [M>V] clears the current VFO data,
but the memory channel data remains
unchanged.
c
A VFO
Ll
1
zi Cl
Jf Jf.
ZI
Jf
n
LI
n ri
LI. LI
FM
S 1 3 5 7 9 20 40dB
< 2 4 6 10
J
2 Select the memory channel to be confirmed using
the Alternate Tuning control or microphone
[UP]/[DWN].
The following chart shows how transmit and receive
frequencies are transferred:
T
Z!
/c* T J
/
L!
c n n
/.
1 Jf LI. LI
USB
SI 3 5 7 9 20 40dB
1
_______________ 2_____ 1_
6 10 M.SCR J
3 To return to the previous mode, press [CLR].
• When you select Memory Scroll, you can
transfer data from one memory to another.
Refer to page 28.
Note: If you select a split-frequency channel, you cannot confirm
the transmit frequency and transmit moduiation mode using this
method. Also this method cannot be used to confirm the contents
of memory channel 99. Refer to "CONFIRMING LOWER/UPPER
FREQUENCY LIMITS" {page 31}.
MEMORY TRANSFER
MEMORY/CALL CHANNEL^ VFO
Transfer the contents of memory channels 00 to 99,
or the Call channel contents, to the current VFO with
the following procedure:
1 Press [MR] to change from VFO mode to Memory
Recall.
• The last memory channel selected appears.
• To transfer the Call channel, press [M.IN]
before the next step.
VFO Selected
BEFORE
dressing M>V
Button
Type of
Memory
Channel
VFO Contents AFTER Pressing
M>V Button
VFO A VFO B
VFO A
Simplex
Channel or
Channel 99 Simplex
Channel data
or Channel
99 data No Change
Split Channel spilt Memory
Channel RX
data Spiit Memory
Channel TX
data
VFO B
Simplex
Channel or
Channel 99 No Change Simplex
Channel data
or Channel
99 data
Split Channel Split Memory
Channel TX
data
Spiit Memory
Channel RX
data
Note:
♦
When [M>V] Is pressed after you have temporarily changed
the contents of the recalled channel, the currently displayed
data is transferred to the VFO.
♦
Automatic Offset takes priority over the transferred shift status.
However, the transferred moduiation mode overrides the
Automatic Moduiation function.
n n u zi o II n n n
u1 I J J. J LI U. LI
e 4 c 7 Q 20 40dB
2 Select a memory channel using the
Alternate Tuning control or microphone
[UP]/[DWN].
27