Kenwood TM-255E - Manual (Page 21)

3 MENUSETUP
__
ÎViéliu No^ Oescrifition Selections Default Page
50 Key Confirmation Beep Tone ON/OFF ON 38
51 Modulation Mode Audible Indicator
• Morse (ON) or Beep (OFF)
ON/ OFF ON 39
52 Error Alarm
• Morse (ON) or Beep (OFF)
ON/OFF ON 39
53 Tone/ CTCSS Frequency Select 67.5 to 250.3 Hz 88.5 Hz 21,40
54 Peak Meter Hold ON/OFF ON 37
55 Main Tuning Control Enabled during Memory Recall ON/OFF OFF 26
56 Program Scan Hold ON/ OFF OFF 29
57 RIT Maximum Frequency Shift
• 1.1 kHz in 10 Hz steps or 2.2 kHz in 20 Hz steps
1.1 kHz/2.2 kHz 1.1 kHz 33
58 Automatic Power Off ON/ OFF OFF 37
59 Time-Out Timer OFF/ 3/ 5/10/ 20/ 30 minutes OFF 34
60 FM Microphone Gain
• High (H) or Low (L)
U
H L 19
61 SSB Automatic Microphone Gain Control ON/OFF ON 23
62 SSB Fine Microphone Gain control -6/ -3/ 0/ 3/ 6 dB OdB 23
63 Automatic Page Cancel ON/OFF OFF 44
64 Open Page ON/ OFF OFF 44
65 DTSS/ Page Transmit Delay Time (offset/ split only) 350 ms/ 550 ms 350 ms 41,44
66 Squelch Select
• Noise Squelch (OFF) or S-meter Squelch (ON)
ON/ OFF OFF 16
67 S-meter Squelch Hang Time Select OFF/125/ 250/ 500 ms 500 ms 16
68 Main Tuning Control Lock OFF/ F3/ All OFF 37
69 [PROCl, [AlP], [NBl, [PF] Lock ON/ OFF OFF 37
70 Microphone PF1 Key Assignment 00 to 99 Menu Setup
(83)
35
71 Microphone PF2 Key Assignment 00 to 99 Memory
Recall (33)
35
72 Microphone PF3 Key Assignment 00 to 99 VFO mode
(20)
35
73 Microphone PF4 Key Assignment'' 00 to 99 Call channel
Recall (24)
35
74 PF Button Assignment 00 to 99 Voice
synthesizer
(85)
36
75 Channel Display
• Frequency Display (ON) or Channel Display (OFF)
ON/OFF ON 37
76 Transverter Frequency Display
« 1240 to 1299 MHz or 2400 to 2449 MHz in 1 MHz
steps
OFF/1240-1299/ 2400-2449 OFF 37
77 9600 bps Packet Select ON/ OFF OFF 22
78 Automatic Offset Select ON/ OFF 0№ 20
1 MC-45 and MC-45DM only
2 TM-255A (General version) and TM-455A/E: OFF
14