2 select the program setting mode, 3 select the program no. to be used, Specify the day(s) of the week with the – Kenwood UD-900M User Manual
Page 74: Numeric keys, Input the on time with the numeric keys, 10 activate the execution of the program, Input the off time with the numeric keys, Y select the rec mode, 11 switch the power off, Qd q3 m i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of timer
Be sure to adjust the present time before proceeding
the following.
Timer recording of radio broadcast
| Remote control unit only]
1
Switch the power ON and receive a sta
tion to be recorded.
2 Select the program setting mode.
1
S E L E C T P R E I E R R H
P N [
The program No. indicators (1 to 4) blink.
3 Select the program No. to be used.
SUN
TTJ6 WED
JSSEL
CD cn QD m
Select from 1 to 4.
p,.g
3
g
3
seconds.
• The selected program No. indicator blinks.
^ Specify the day(s) of the week with the
numeric keys.
SUN MON TUE WEO THU
Cn CD CZI GD CD
(XI m m S m'
_ ' ii' H i ' •
8
Select the preset key under which the
station to be received has been preset.
CD CD CD CD CD
Qj m a S S
CD 4^
E , E L E E J
R R E E E E
ENTER
The station must be preset previously.
9
Set up the cassette deck ready for re
cording.
0 Insert a tape in Deck B.
@ Set the tape transport direction.
(
3
)
Select the side(s) to be recorded onto.
0 Select the Dolby NR mode.
(
5
)
Set the input selector to TUNER.
(D
Press the CRLS key.
• The auto-bias adjustment cannot be used.
Input the ON time with the numeric keys.
0:00 AM;
J
¡'j p p J p p J J p p
^
y , , u
,
10
Activate the execution of the program.
0
R R D E R R M
Input the OFF time with the numeric keys.
0:30 AM: ® ®
[1]
j p p j
P
p p J I r 1 E
4
.
0 Select the program No. to be executed by
pressing the numeric key under which it is set.
QD Q3 m I
~ j l
y Select the REC mode.
^
ENTra
The selected program No. indicator lights up.
11
Switch the power OFF.
1 J I E ~ R E E 2
The timer modes are switched between PLAY and REC every
time the
I
BAND
I
key is pressed.
Press the
I
POWER
I
key of the power amplifier.
Notes;
. _
1. When a program has previously been set in the program No,
selected in step 3, the newly-set program replaces the previ
ous program.
2. When the power is turned ON by the timer, the volume level
is automatically set to the lowest level._______
3. Do not operate the fCLEAR |key or | POWER
I
key while the
timer program execution has been activated; otherwise mal
function will occur.
To change the program
During the setting
operation
After setting is
completed
3
Repeat the program
ming procedure from
step 2.
74
u
D-900/UD-900M (En)