Kenwood UD-900M - Manual (Page 32)

Reception of radio broadcast
AUTO key
BAND key TUNING keys DISPLAY key
Receiving broadcast stations
and storing them in memory
(preset operation)
Display the frequency display.
• Every time the|~DISPLAY| key is pressed, the displayed
contents are switched in order or Frequency ^ Broad­
cast station name-^Presence display-^ Present time
Date (month & day).
Frequency display
2 Select the broadcast band.
The frequency is displayed for a few seconds when £
key associated with tuning is pressed.
The bands are switched as follows every time
the
I BAND I key is pressed.
■^FM^AM (MW-^LW)
0 Select the tuning mode. AUTO indicator
Normally, select the auto mode (with AUTO lighted).
Press the key to select the auto (AUTO lighted) or manual
(not lighted) mode.
4 Tune the desired station.
To decrease
frequency To increase
frequency
• The TUNED indicator lights up when a station is re­
ceived.
• Use manual tuning mode when the radio wave is weak
and noisy. At this time, the stereo FM broadcast is re­
ceived in monaural mode.
Auto tuning mode Manual tuning mode
Press once.
(Tuning stops automatically
when a station is received.)
Press repeatedly, or press and
hold, until the desired station
is received.
Store the station in preset memory.
© Press the ENTER key.
|RemoteControl unit only]
«
"MEMOFIY" lights up for approx, 5 sec.
• Proceed to step d) before "MEMORY" stops lighting.
© Press the desired numeric key.
Examples of input
To select preset No. T5: l+iol [|]
To select preset No. 20: fTOI i+io]
• When a station has previously been preset under the
numeric key pressed, the newly preset station replaces
the previous station.
• When preset is to be continued, repeat steps 2 to 5.
• Up to 20 broadcast stations can be preset regardless of
the broadcasting bands.
m GD m m m
G b a S S a
E D
r
"MEMORY" goes off.
9 г 5 /
32 u D-900/UD-900M (En)