Rewind & play operation, Single-tune repeated playback operation, Dash 8l play operation – Kenwood UD-900M User Manual
Page 56: 1 determine the playback mode (conditions), To cancel the playback above in the middle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DPSS operation
■ Rewind & Play operation
This operation is not available from the remote con
trol unit.
Single-tune repeated playback
operation
^ Play the tune to be repeated.
O Press the play key of the same direction
^ as the current tape transport direction.
When direction of tape direction indicator is: ^
Í ■“
.
(S)
^ ____
Normal playback resumes after repeating the same
tune for 16 times.
Deck A operation keys
Deck B operation keys
DIRECTION select switch
■ Dash
8
l
Play operation
The Dash & Play skips long non-recorded spaces au
tomatically as the tape is played.
This operation is not available from the remote con
trol unit.
*1 Determine the playback mode (conditions).
O ....Two sides are repeated 8 times, after which play
back stops.
ID ....Two sides are repeated only once, after which play
back stops.
....One side is repeated 8 times, after which playback
stops.
• In case the DIRECTION select switch is set to ‘"ZD"
and tapes are inserted in both of the decks, when a
deck finishes Dash & Play, the other deck starts Dash
& Play for 16 times, after which it stops.
To cancel the playback above in the middle.
Playback is stopped.
D
56
u
D-900/UD-900M (En)