To add a track to the program, I remote control unit onl, To change a track in the program – Kenwood UD-900M User Manual
Page 45: Remote control unit onlyl, T press the check key, 2 select the track no. to replace the previous one, To clear tracks from the program, Clearing from the last track, Clearing the whole of program, Auto-space function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UD
900
IVI (DP - MA
9
)
To add a track to the program
I
Remote control unit onl^
Press the key(s) for the track No. to be added.
0 Select the disc.
(±1 (±1 □
PROS. EXE. CLEAR
□ O (¿] El
SW.POWER S-WOTECn* S.W.VQL
0 Select the track number.
as m S m
ED
To change a track in the program
Remote control unit onlyl
t Press the CHECK key.
fp^ indicator lights up.
i DB P- D I
Press until the P-No. to be changed is displayed.
2 Select the track No. to replace the previ
ous one.
® Select the disc.
a a o ^
d) Select the track number.
a S m S m
m a CD m m
ED
^
Press while the [p.C.|indicator is lighted.
• The track being played cannot be changed.
To clear tracks from the program
Clearing from the last track
Every time the key is pressed, tracks are cleared from
the last track in order.
The currently playing track cannot be deleted.
Clearing the whole of program
Press either key.
P.MODE
5
Remote control unit
CLOSE
i EJECT
Auto-Space function
During playback in the program mode, when thej SPAC~Elkey is
pressed, a space of about 4 seconds is reserved automatically
between the programmed tracks. This function is provided to
facilitate the DPSS function of the cassette deck. However, such
a space could also be reserved in case the sound of two tracks
are continued, for example with some classic music and live
recordings.
Lights up
SPACE
&
To cancel Auto-Space function, press the [ SPACE | key
again.
UD-900/UD-900M(En)45